---------------------------------------------------------------------------------------------------------
PUMPGUARD High Water Alarm with Float Switch Override
Eliminates the threat of flooding due to a bad switch.

---------------------------------------------------------------------------------------------------------
DOWNLOAD USER MANUAL
---------------------------------------------------------------------------------------------------------

Does your sump pump continue to operate if your pump’s main switch fails? Does your sump pump have a back-up or secondary switch? Does your sump pump sound an audible alarm when your pump’s switch fails? Does your sump pump sound an audible alarm when the water level rises to high in your sump pit? Is your sump pump capable of integrating with an optional dialer to remotely notify when any of these events occur?

If you answered “NO” to any of these questions, then the PUMPGUARD is the solution for you.

The PUMPGUARD incorporates three solutions in one unit. Solution one (1); it sounds an audible alarm when the water level rises too high. Solution two (2); it sounds an audible alarm if your pumps switch fails. Solution three (3); it overrides your pump’s main switch if you pump’s switch fails. Add an optional phone dialer and the PumpGuard can alert you outside your home that an event has occurred.

PumpGuard Features

• Features an alarm override circuit and switch that sounds an alarm and overrides your primary pump switch when you pumps switch fails
• Will alarm every cycle the pump operates until the pump switch is replaced.
• For use with fully-automatic sump pumps or sewage pumps
• For use with 115v pumps up to 15 amps, 1 HP or less
• For pumps utilizing two-cord piggyback switch system only
• Audible alarm (80 db. @ 10 Feet)
• Indicator Light – Indicate when power is on, pump is running, alarm is activated
• Dry contacts for remote monitoring – optional dialer available for remote monitoring
• U.L. Listed – Made in the U.S.A
---------------------------------------------------------------------------------------------------------

The PumpGuard is the most innovate pump protection system ever made due to its ability to eliminate the threat of flooding due to a bad pump switch. The PumpGuard features an alarm override circuit and switch that will not only sound an alarm but will override your primary pump switch and continue to operate your pump if the pumps main switch fails. It is designed specifically for use with fully-automatic 115v sump or sewage pumps utilizing a two-cord piggyback switch system. Combine your PumpGuard with an optional dialer for remote alert and an optional battery back-up system for the ultimate flood protection.