---------------------------------------------------------------------------------------------------------
PUMPGUARD PLUS Alternating Duplex Controller/High Water Alarm
Eliminates the threat of flooding due to a sump pump hardware failure

---------------------------------------------------------------------------------------------------------
DOWNLOAD USER MANUAL
---------------------------------------------------------------------------------------------------------

Do you have two sump pumps in the same sump pit? Are you able to alternate each pump between cycles? Are your pumps exercised on a regular basis? Does your sump pump sound an audible alarm when either of your sump pumps fails? Does your sump pump sound an audible alarm when the water level rises to high in your sump pit? Is your sump pump capable of integrating with an optional dialer to remotely notify when any of these events occur?

If you answered “NO” to any of these questions, then the PUMPGUARD PLUS is the solution for you.

The PUMPGUARD PLUS incorporates three solutions in one unit. Solution one (1); it alternates the operation of two sump pumps installed in the same sump pit between cycles. Solution two (2); it sounds an audible alarm when the water level rises too high. Solution three (3); it sounds an audible alarm either of the two sump pumps fails Add an optional phone dialer and the PumpGuard can alert you outside your home that an event has occurred.

PumpGuard Plus Features

• Includes (1) PumpGuard Plus Control Unit and (1) Adjustable Vertical Float Switch and Clamp Adapter
• This unit is used to operate 2 sump pumps in the same sump pit
• Automatically alternates between two pump every cycle for even wear and redundancy
• Cycling between pumps exercises each pump, reduces wear and increases the life span of your pumps
• Features an alarm override circuit and switch that sounds an alarm should either pump fail
• If either pump fails, the remaining pump will take over as your primary pump
• Exclusive cast iron wheel mount assembly, stabilizes the tiller for better control
• For use with fully-automatic sump pumps or sewage pumps
• For use with 115v pumps up to 15 amps, 1 HP or less
• For pumps utilizing two-cord piggyback switch system only
• Audible alarm (80 db. @ 10 Feet)
• Indicator Light – Indicate when power is on, pump(s) are running, alarm is activated
• Dry contacts for remote monitoring – optional dialer available for remote monitoring
• U.L. Listed – Made in the U.S.A
---------------------------------------------------------------------------------------------------------

The PumpGuard Plus is a state-of-the-art high water alarm and pump alternator. You will never have to worry about a bad pump again because the PumpGuard Plus alternates between the two pumps on each cycle. This ensures proper operation, even ware and allow the pumps to exercise, thus reducing exposure to binding. If a pump should fail, the PumpGuard Plus’s override/alarm switch sound an audible alarm, alerting that a failure has occurred and automatically activates the next pump in sequence. If one pump is rendered inoperable, the remaining pump will take over as your primary pump. Combine your PumpGuard with an optional dialer for remote alert and an optional battery back-up system for the ultimate flood protection.