DOWNLOAD USER MANUAL
--------------------------------------------------------------------------
Submersible Sump Pump
SUMP PUMPS are water removal pumps designed to remove ground water from your basement and to divert the water to the outside, away from your foundation. SUBMERSIBLE SUMP PUMPS are electric powered pumps designed to operate fully or partially “submerged” underwater and are typically installed within a sump pit basin. The most common application of a submersible sump pump is for basement drainage and to prevent flooding. The pump motor is oil filled and sealed for cooler running, quiet operation and yields longer operational life expectancy. This pump is not suitable for aquatic life.
This pump comes with a vertical float switch and the float switch is detached from the sump pump. Being detached from the pump, this allows you to adjust the on/off water level within your sump pump basin and eases replacement in the event of a switch failure. The switch consists of a float, a vertical rod and an on/off switch to activate the pump. Vertical float switches are limited in motion and move up and down by incorporating a vertical rod, thus improving the performance of the switch, while minimizing the chance the float or switch will get stuck and minimizing pump failure.
---------------------------------------------------------------------------------------------------------------------------
System Features
- 3/4 HP High Performance High Efficiency Motor
- 84 GPM/5040 GPH @ 10 Ft Head
- Energy efficient pump, uses only 4.6 amps(compare to 10+ amps on other pumps)
- 550 watts (4.6 amps) @ 115vAC
- Single, Adjustable, Detached SPI Float Switch
- Cast Iron Volute w/Cold Rolled Steel Motor Housing
- 2 Inch NPT Discharge
- Dimensions: 9.1" x 6.3" x 14.5", 13.5 LBS
| Price | $369.99 |
| Pump Country of Origin | Taiwan |
| Model Name | STORMPRO BA75M |
| Manufacturer | STORMPRO |
| Model/SKU # | BA75M |
| Switch Type | SINGLE VERTICAL FLOAT SWITCH |
| UPC Code | HP20110 |
| What is it? | Submersible pump used to remove ground water from a sump pit. The most common application of a sump pump is for basement drainage to prevent residential flooding |
| Assembled Dimensions | 7.9" x 5.5" x 12.6", 13.5 LBS |
| Assembly Requirement | None |
| Installation Requirement | Installation Required |
| Pump Classification | Submersible Sump Pump |
| Type of Switch | Vertical Float Switch (detached from pump) |
| Number of Switches | 1 |
| Switch Turns on at | Any Height, switch is adjustable |
| Swich Cuts Off At | 2 Inches |
| Motor Housing Material | Cold Rolled Stainless Steel |
| Motor Cover Material | Glass Fiber Reinforced |
| Impeller Material | Cast Iron Non-clogging vortex impeller |
| Volute Material | Cast Iron |
| Seal Material | Carbon and Ceramic |
| Shaft Material | Cold Rolled Stainless Steel |
| Discharge Size | 2" NPT |
| Sump Pump Current Rating | 115v AC |
| Sump Pit Suggested Size | at least 11" Diameter x 13" High |
| Maximum Head Height | 35 Feet |
| GPH @ 0' Discharge Head | 5820 GPH (97 GPM) @ 0' |
| GPH @ 10' Discharge Head | 5040 GPH (84 GPM) @ 10' |
| Max Output Power Rating (Continuous) | 550 watts (4.6 amps) |
| Max Output Power Rating (Surge) | 1925 watts (16.1 amps) |
| Output Voltage | 115vAC |
| Output Frequency | 60Hz +/-1Hz |
| Overload Protection | Built-In thermal overload protector |
| Operating Temperature | 40°F - 120°F (4.5°C - 49°C) |
| Regulatory Approvals | CSA#1830340 |
| Warranty | 1 Year Manufacturer Warranty |
