--------------------------------------------------------------------------
DOWNLOAD USER MANUAL
--------------------------------------------------------------------------
Submersible Sewage Pump
SEWAGE PUMPS are water removal pumps designed to pump sewage waste water containing solids up to 2” in diameter. SUBMERSIBLE SUMP PUMPS are electric powered pumps designed to operate fully or partially “submerged” underwater and are typically installed within a sump pit basin. The most common application of a submersible sewage pump is to pump waste and waste water from a bathroom to a sewer or to a septic line. The pump motor is oil filled and sealed for cooler running, quiet operation and yields longer operational life expectancy. This pump is not suitable for aquatic life.
This pump comes with an attached float switch with Switch Genius™ Technology designed to provide maximum control of the sump pit water level. The Switch Genius™ is a vertical switch that senses and detects the presence of water. When water is detected at 8 inches from the bottom of the pump, the pump will start automatically and operate until the water level recedes to 3 inches. Unlike a vertical float switch with a vertical rod, the Switch Genius™ has no moving parts and minimizes the possibility of on/off failure
---------------------------------------------------------------------------------------------------------------------------
System Features
- 1/2 HP Submersible Sewage Pump
- 5280 GPH (88 GPM) @ 10'
- 1000 watts (8.7 amps)
- Single, attached Tether Float Switch
- Cast Iron Volute w/Cast Iron Motor Housing
- 2 Inch NPT Discharge
- Dimensions: 13” Diameter x 13.25" High, 25 LBS
| Pump Country of Origin | No |
| Model Name | WAYNE CSE50Te |
| Wayne Model Cross Reference | No |
| Switch Type | TETHER SWITCH |
| UPC Code | 040066214751 |
| Assembled Dimensions | 13" Diameter x 13.25" h |
| Assembly Requirement | None |
| Installation Requirement | Installation Required |
| Pump Classification | Sumbersible Sewage Pump |
| Type of Switch | Tether Float Switch (attached to pump) |
| Number of Switches | 1 |
| Switch Turns on at | Variable |
| Swich Cuts Off At | Variable |
| Motor Housing Material | Cast Iron |
| Motor Cover Material | Cast Iron |
| Impeller Material | Thermoplastic |
| Volute Material | Cast Iron |
| Seal Material | Carbon/Ceramic |
| Shaft Material | Stainless Steel |
| Discharge Size | 2" NPT |
| Sump Pump Current Rating | 115v AC |
| Sump Pit Suggested Size | at least 11" Diameter x 13" High |
| Maximum Head Height | 25 Feet |
| GPH @ 0' Discharge Head | 7680 GPH (128 GPM) @ 0' |
| GPH @ 10' Discharge Head | 5280 GPH (88 GPM) @ 10' |
| Max Output Power Rating (Continuous) | 1000 watts (8.7 amps) |
| Max Output Power Rating (Surge) | 3500 watts (30 amps) |
| Output Voltage | 115vAC |
| Output Frequency | 60Hz +/-1Hz |
| Overload Protection | Built-In thermal overload protector |
| Operating Temperature | 40°F - 120°F (4.5°C - 49°C) |
| Regulatory Approvals | UL File # E50797 |
| Warranty | 1 Year Manufacturer Warranty |
Questions on WAYNE CSE50Te - 1/2 HP Sewage Pump
No questions asked yet
Ask Your Own Question
Write Your Own Review
© 2012 Alta Power Corp All Rights Reserved.
SumpPumpsUSA is a division of
Alta Power Corp
