You have no items in your shopping cart.
STORMPRO MAXX Battery Backup Sump Pump Kit -------------------------------------------------------------------------------------------------------------------------------------------------------------------------
STORMPRO USER GUIDE ION SWITCH USER GUIDE SUMP PUMP USER GUIDE
STORMPRO SPEC SHEET ION SWITCH SPEC SHEET EXTRA BATTERY BANK WIRING DIAGRAM
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What’s Included
Includes everything needed to instantly provide complete flood protection out of the box.
• SUMP PUMP - (Qty-1) Stormpro BA-33M 1/3 HP Hi-Efficiency, Heavy Duty Sump Pump /w solid state switch
• POWER SYSTEM - (Qty-1) Stormpro MAXX; 600w inverter with 5 amp charger, Dual Chassis Battery Enclosure with Cabling
• PUMP SWITCH - (Qty-1) Ion Storm Solid State Digital Pump Switch - 10 Foot Cord Length
• BATTERY - (Qty-2) Power Plus 120 amp-hour AGM battery (120 aH Total Battery Capacity)*
* expandable battery capacity, 240ah max
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Stormpro MAXX Overview
The STORMPRO MAXXi is a Flood Control System complete with a heavy duty 1/3 HP Sump Pump, battery back-up power solution. The Sump Pump can be installed as a replacement to your existing sump pump or can be installed solely as a backup system to protect against primary pump failure.
The included back-up powerpack is powerful enough to provide back-up power to the included sump pump as a primary or secondary pump for up to 40 hours.* The back-up powerpack stores household electricity in an internal battery and provides instantaneous power to the sump pump when utility power fails. The StormPro back-up powerpack is a clean, quiet, smart alternative to a generator, produces no emissions and is safe to operate indoors
*Operating hours calculated based on a typical average cycling rate of 10%. Actual run times will vary based on actual cycling rates for the installed environment, thus actual run-times may be higher or lower depending on the actual rate at which the pump cycles on and off.
How it Works
After installing and configuring the StormPro Sump Pump as your primary or secondary pump, simply plug the sump pump into the StormPro PowerPack and plug the powerpack into a standard wall outlet. Once your sump pump is connected to the powerpack , the powerpack will continue to use your utility power until a power failure is detected. Once a power failure is detected, the powerpack will instantaneously begin to supply standard household electricity to the connected sump pump. Once utility power is restored, the powerpack will automatically switch the sump pump to utility power and immediately begin to recharge the integrated battery in anticipation of the next power failure.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
System Features
• 1/3 HP, 540w(4.6 amps) 115vAC Heavy Duty Sump Pump
• High Efficiency, low wattage, delivers up to 3000 GPH@10 FT.
• 9' Cord Length on Power Unit, 10' Cord Length on pump and Ion Switch, grounded
• Dual Chassis Battery Box. Unit can operate with one or two batteries. Battery enclusue fits up to two batteries
• Additional Battery can be added external to the unit to expand operational run-time capacity
• Operates on AC or DC power
• Installs as primary or secondary sump pump
• Automatic Transfer to/from back-up power
• Automatic Charger and Battery Monitoring System
• UL/CSA listing ensures compliance and reliability
• No emissions, no exhaust, no moving parts, silent operation -------------------------------------------------------------------------------------------------------------------------------------------------------------------------
***** PLEASE NOTE: (2) Power Plus - 120aH Battery is included FREE with purchase of this unit ***** -------------------------------------------------------------------------------------------------------------------------------------------------------------------------
All content on this website was written by and is the intellectual property of Alta Power Corp© SumpPumpsUSA.com© is a division of www.altapower.com© All Rights Reserved
| Model Name | STORMPRO MAXX STANDARD |
| Manufacturer | SUMPRO |
| Model/SKU # | SPMN20168 |
| Brand Name | STORMPRO |
| Manufacturer Brand Name | No |
| Battery Types Supported | Sealed Lead Acid, Deep Cycle Marine |
| Battery Included? | Yes |
| Number of Batteries Included | 2 |
| Internal Battery Voltage | 12vDC |
| Total Battery Capacity Included | 120 (ah) ampere hours, 120 ah per battery |
| Can the Battery Capacity Be Expanded? | Yes |
| Total Number of Batteries You Can Add | 2 |
| Total Maxiumum Battery Capacity | 480 (ah) ampere-hours |
| Battery Box Dimensions | 15"h x 18"w x 20"d |
| Weight (without batteries) | 24 lbs |
| Weight (with batteries) | 100 lbs |
| Assembly Requirement | Minor Assembly Required |
| Installation Requirement | Installation Is Required |
| Pump Classification | Submersible |
| Number of Pumps Included | 1 |
| Type of Switch | Ion Solid State Digital Water Sensor (adjustable height - detached from pump) |
| Number of Switches | 1 |
| Switch Turns on at | 6" from middle of switch housing |
| Swich Cuts Off At | 3" from middle of switch housing |
| Motor Housing Material | Cold Rolled Stainless Steel |
| Motor Cover Material | Glass Fiber Reinforced |
| Impeller Material | Cast Iron Non-clogging vortex impeller |
| Volute Material | Cast Iron |
| Seal Material | Carbon and Ceramic |
| Shaft Material | Cold Rolled Stainless Steel |
| Discharge Size | 1-1/2" NPT |
| Sump Pump Current Rating | 115v AC |
| Sump Pit Suggested Size | at least 11" Diameter x 13" High |
| Maximum Head Height | 35 Feet |
| GPH @ 0' Discharge Head | 4080 GPH (68 GPM) @ 0' |
| GPH @ 10' Discharge Head | 3000 GPH (50 GPM) @ 10' |
| Max Output Power Rating (Continuous) | 540 watts (4.5 amps) |
| Max Output Power Rating (Surge) | 875 watts (7.28 amps) |
| Output Voltage | 115v AC |
| Output Frequency | 60Hz +/-1Hz |
| Overload Protection | Built-In thermal overload protector |
| Operating Temperature | 40°F - 120°F (4.5°C - 49°C) |
| Max Output Power Rating (Continuous) | 600 watts (15 amps) |
| Max Output Power Rating (Surge) | 1200 watts (30 amps) |
| Power Unit Output Voltage | 115v AC |
| Output Frequency | 60Hz +/-1Hz |
| Transfer Switch Rating | 15 amps/12 Milliseconds |
| AC Output Waveform | Modified Sine Wave |
| Inverter no-load current | <.35 amps (battery drain with no load on inverter) |
| AC Recharge Time | Up to 24 Hrs Maximum (Depends on battery depth of discharge) |
| DC Recharge Time | No DC Charging Available |
| Surge Suppression | Built-In |
| Overload Protection | Built-in; 15 amp circuit breaker protection |
| Warranty | 3 Year Manufacturer Warranty |
No questions asked yet