--------------------------------------------------------------------------
SPARE BATTERY BANK WIRING
--------------------------------------------------------------------------
Sumpro Platinum Overview
The Sumpro Platinum is a Complete Flood Control System, which includes two identically sized heavy duty 3/4 HP Sump Pumps complete with a battery back-up power solution and pump alternating system. Each pump is powerful enough to be installed as a primary pump and can be installed as replacement to an existing primary sump pump. The second sump pump is installed as a secondary pump, which will back-up the primary sump pump.
The included PumpGuard Plus alternator system will cycle each pump as needed: if one pump fails the other pump will take over and sound an alarm. Additionally, the unit has a built-in main pump switch failure override, high water alarm and is capable of connecting to your home security system or optional dialer.
The included Sumpro Model 75 back-up powerpack is powerful enough to provide back-up power to the included sump pumps as a primary or secondary pump for up to 18 hours.* The back-up powerpack stores household electricity in an internal battery and provides instantaneous power to the sump pump when utility power fails. The Sumpro back-up powerpack is a clean, quiet, smart alternative to a generator, produces no emissions and is safe to operate indoors.
*Operating hours calculated based on a typical average cycling rate of 10%. Actual run times will vary based on actual cycling rates for the installed environment, thus actual run-times may be higher or lower depending on the actual rate at which the pump cycles on and off.
How it Works
After installing and configuring the included sump pumps as your primary and secondary pumps, simply plug the sump pumps into the alternator, plug the alternator into the StormPro PowerPack and plug the powerpack into a standard wall outlet. Once the pumps are connected to the powerpack, the powerpack will continue to use your utility power until a power failure is detected. Once a power failure is detected, the powerpack will instantaneously begin supplying standard household electricity to your sump pumps. Once utility power is restored, the powerpack will automatically switch your pumps to utility power and immediately begin recharge the integrated battery in anticipation of the next power failure.
---------------------------------------------------------------------------------------------------------------------------
What’s Included
Includes everything needed to instantly provide complete flood protection out of the box.
• (2) 3/4 HP Hi-Efficiency, Heavy Duty Sump Pump
• (2) Fully Adjustable SPI Vertical On/Off Float Switch
• (1) PumpGuard Plus Pump Alternator with high water/pump failure alarm signal
• (1) Power Head; 1800w modified sine wave inverter with 40 amp charger
• (1) 16 Gauge - Dual Chassis Battery Enclosure and cabling
• (2) 120 amp-hour AGM battery (240 aH Total Battery Capacity)*
* expandable battery capacity, 480ah max
---------------------------------------------------------------------------------------------------------------------------
System Features
• 2 - 3/4 HP, 550w(4.6 amp) 115vAC Heavy Duty Sump Pump with on/off float switch
• High Efficiency, low wattage, delivers up to 5000 GP@10 FT.
• Operates on AC or DC power
• Installs as primary or secondary sump pump
• Automatic Transfer to/from back-up power
• Automatic Charger and Battery Monitoring System
• UL/CSA listing ensures compliance and reliability
• No emissions, no exhaust, no moving parts, silent operation
---------------------------------------------------------------------------------------------------------------------------
***** PLEASE NOTE: (2) 120aH Batteries are included FREE with purchase of this unit *****
An optional battery bank is available and can be purchased as an option
An additional battery bank will double the estimated operational run time
---------------------------------------------------------------------------------------------------------------------------
| Price | $3,660.99 |
| Model Name | SP7702 |
| Manufacturer | SUMPRO |
| User Guide | Click To Download |
| Product Specs | Click To Download |
| Spare Battery Wiring | Click To Download |
| Model/SKU # | 872-7702 |
| Brand Name | SUMPRO |
| UPC Code | SumproPLATINUM |
| What is it? | The ultimate redundant combination of dual sump pumps and battery backup power. The kit includes two sump pumps and a powersource and provides a backup solution to your main sump pump as well as a backup power solution in the event of a power failure. |
| Battery Types Supported | Sealed Lead Acid, Deep Cycle Marine |
| Battery Included? | Yes |
| Number of Batteries Included | 2 |
| Internal Battery Voltage | 12vDC |
| Total Battery Capacity Included | 240 (ah) ampere hours, 120 ah per battery |
| Can the Battery Capacity Be Expanded? | Yes |
| Total Number of Batteries You Can Add | 2 |
| Total Maxiumum Battery Capacity | 480 (ah) ampere-hours |
| Battery Box Dimensions | 12"h x 16.5"w x 14 5/8"d |
| Assembly Requirement | Minor Assembly Required |
| Installation Requirement | Installation Is Required |
| Pump Classification | Submersible |
| Number of Pumps Included | 2 |
| Type of Switch | Vertical Float Switch (detached from pump) |
| Number of Switches | 2 |
| Switch Turns on at | Adjustable |
| Swich Cuts Off At | 2 Inches |
| Motor Housing Material | Cold Rolled Stainless Steel |
| Motor Cover Material | Glass Fiber Reinforced |
| Impeller Material | Cast Iron Non-clogging vortex impeller |
| Volute Material | Cast Iron |
| Seal Material | Carbon and Ceramic |
| Shaft Material | Cold Rolled Stainless Steel |
| Discharge Size | 2" NPT |
| Sump Pump Current Rating | 115v AC |
| Sump Pit Suggested Size | at least 11" Diameter x 13" High |
| Maximum Head Height | 35 Feet |
| GPH @ 0' Discharge Head | 5820 GPH (97 GPM) @ 0' |
| GPH @ 10' Discharge Head | 5040 GPH (84 GPM) @ 10' |
| Max Output Power Rating (Continuous) | 250 watts (2.08 amps) |
| Max Output Power Rating (Surge) | 875 watts (7.28 amps) |
| Output Voltage | 115v AC |
| Output Frequency | 60Hz +/-1Hz |
| Overload Protection | Built-In thermal overload protector |
| Operating Temperature | 40°F - 120°F (4.5°C - 49°C) |
| Max Output Power Rating (Continuous) | 1800 watts (15 amps) |
| Max Output Power Rating (Surge) | 3600 watts (30 amps) |
| Power Unit Output Voltage | 115v AC |
| Output Frequency | 60Hz +/-1Hz |
| Transfer Switch Rating | 15 amps/12 Milliseconds |
| AC Output Waveform | Modified Sine Wave |
| Inverter no-load current | <.35 amps (battery drain with no load on inverter) |
| AC Recharge Time | Up to 15 Hrs Maximum (Depends on battery depth of discharge) |
| DC Recharge Time | No DC Charging Available |
| Surge Suppression | Built-In |
| Overload Protection | Built-in; 15 amp circuit breaker protection |
| Regulatory Approvals | UL Listed to UL 1778 2nd Edition and CSA, C22.2 |
| Warranty | 18 Months from Date of Manufacture or; 12 Months |
