DOWNLOAD USER MANUAL
--------------------------------------------------------------------------
Submersible Sump Pump
SUMP PUMPS are water removal pumps designed to remove ground water from your basement and to divert the water to the outside, away from your foundation. SUBMERSIBLE SUMP PUMPS are electric powered pumps designed to operate fully or partially “submerged” underwater and are typically installed within a sump pit basin. The most common application of a submersible sump pump is for basement drainage and to prevent flooding. The pump motor is oil filled and sealed for cooler running, quiet operation and yields longer operational life expectancy. This pump is not suitable for aquatic life.
This pump comes with an attached float switch with Switch Genius™ Technology designed to provide maximum control of the sump pit water level. The Switch Genius™ is a vertical switch that senses and detects the presence of water. When water is detected at 8 inches from the bottom of the pump, the pump will start automatically and operate until the water level recedes to 3 inches. Unlike a vertical float switch with a vertical rod, the Switch Genius™ has no moving parts and minimizes the possibility of on/off failure.
---------------------------------------------------------------------------------------------------------------------------
System Features
- 1 HP Submersible Sump Pump
- 4200 GPH (70 GPM) @ 10'
- 1127 watts (9.8 amps)
- Single, attached Switch Genius™ Switch
- Cast Iron Volute w/Stainless Steel Motor Housing
- 1-1/2 Inch NPT Discharge
- Dimensions: 9” Diameter x 11.5" High, 13.5 LBS
| Price | $299.99 |
| Pump Country of Origin | USA |
| Model Name | WAYNE CDUCAP1000 |
| Manufacturer | WAYNE |
| Model/SKU # | CDUCAP1000 |
| Switch Type | SWITCH GENIUS WATER SENSOR |
| UPC Code | 04006621354 |
| What is it? | Submersible pump used to remove ground water from a sump pit. The most common application of a sump pump is for basement drainage to prevent residential flooding |
| Assembled Dimensions | 9" Diamter x 11.5" h |
| Assembly Requirement | None |
| Installation Requirement | Installation Required |
| Pump Classification | Submersible Sump Pump |
| Type of Switch | Switch Genius Sensor (attached to pump) |
| Number of Switches | 1 |
| Switch Turns on at | 8 Inches |
| Swich Cuts Off At | 3 Inches |
| Motor Housing Material | Stainless Steel |
| Motor Cover Material | Glass Filled Poly Carbonate |
| Impeller Material | Poly Carbonate |
| Volute Material | Cast Iron |
| Seal Material | Ceramic/Carbon |
| Shaft Material | Carbon Steel |
| Discharge Size | 1-1/2" NPT |
| Sump Pump Current Rating | 115v AC |
| Sump Pit Suggested Size | at least 11" Diameter x 13" High |
| Maximum Head Height | 35 Feet |
| GPH @ 0' Discharge Head | 5100 GPH (85 GPM) @ 0' |
| GPH @ 10' Discharge Head | 4200 GPH (70 GPM) @ 10' |
| Max Output Power Rating (Continuous) | 1127 watts (9.8 amps) |
| Max Output Power Rating (Surge) | 3944.5 watts (34.3 amps) |
| Output Voltage | 115vAC |
| Output Frequency | 60Hz +/-1Hz |
| Overload Protection | Built-In thermal overload protector |
| Operating Temperature | 40°F - 120°F (4.5°C - 49°C) |
| Regulatory Approvals | UL Listed no. E50797 |
| Warranty | 5 Year Manufacturer Warranty |
